Select GPS tracker model

XT-2150C is a fully integrated tracking device for communicating mobile asset location information to owners via ubiquitous CDMA networks. With an integrated GPS engine, embedded cellular, PCS and GPS antennas, Xirgo XT2150C is a cost effective solution for monitoring vital location data for remote assets

Xirgo XT2150C is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.

Xirgo XT2150C has an optional external GPS connector for instances where higher GPS sensitivity is required. With it’s compact design, Xirgo XT2150C can be covertly installed in tight locations.

Xirgo XT2150C provides two all-purpose digital inputs and one internal analog input used to monitor battery voltage. In addition to multiple inputs, Xirgo XT2150C provides a digital output that can drive ignition relays.

With the support of CDMA and dual band 800/1900 networks, Xirgo XT2150C is the ideal choice to be used with CDMA networks.

Xirgo XT2150C has following features:

• LED status indicators for GPS lock and network  registration
• Over-the-air  firmware  upgrade
• Supports TCP, UDP, and FTP
• Integrated GPS engine and antenna
• Supports SMS connectivity

External power supply might be 10-16V, which makes possible to use Xirgo XT2150C with all car models.

With its highly mature firmware, Xirgo XT2150C supports TCP, UDP, FTP and is capable of firmware update and configuration over-the-air.

In case you are not able to configure device over the air, manual management over SMS-commands and configuration software is also available.

XT-2050C is the most versatile and economical diagnostic device available today for communicating vital vehicle information to owners via ubiquitous CDMA networks.

With an optional integrated GPS engine, embedded cellular, PCS and GPS antennas, and integrated OBDII interface, Xirgo XT2050C is the ultimate solution for fleet managers in need of monitoring location, speed, and many other codes available on the OBDII port of vehicles.

Xirgo XT2050C is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.

With a highly sensitive GPS engine along with an integrated GPS antenna and multiple OBDII protocols supported, Xirgo XT2050C can be installed in majority of vehicles that ware manufacture from 1996 and up.

With the support of CDMA and dual band 800/1900 networks, Xirgo XT2050C is the ideal choice to be used with the CDMA networks.

Xirgo XT2050C has following features:

• LED status indicators for GPS lock, GSM registration and OBD II communication
• Over-the-air  firmware  upgrade Supports TCP, FTP, HTTP and UDP
• Optional integrated GPS engine and antenna for tracking applications
• Supports SMS connectivity
• No external antennas or power connectors needed
• Supports OBDll protocols

External power supply might be 6-18V, which makes possible to use Xirgo XT2050C with all car models.

With an integrated J1962 connector, an extremely compact design powered through the OBDII port, and low power consumption, Xirgo XT2050C can be installed in matter of seconds which substantially reduces the high cost of installation.

With its highly mature firmware, Xirgo XT2050C supports TCP, UDP, FTP and is capable of firmware update and configuration over-the-air.

In case you are not able to configure device over the air, manual management over SMS-commands and configuration software is also available.

Xirgo XT2060 3G is the most versatile and economical diagnostic device available today for communicating vital vehicle information to owners via ubiquitous UMTS networks.

With an optional integrated GPS engine, embedded cellular, PCS and GPS antennas, and integrated OBDII interface, Xirgo XT2060 3G is the ultimate solution for fleet managers in need of monitoring location, speed, and many other codes available on the OBDII port of vehicles.

Xirgo XT2060 is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.

With a highly sensitive GPS engine along with an integrated GPS antenna and multiple OBDII protocols supported, Xirgo XT2060 3G can be installed in majority of vehicles that ware manufacture from 1996 and up.

With Six-band GSM 3G module Xirgo XT2060 can be operated all over the world both in 2G and 3G networks.

Xirgo XT2060 has following features:

• 3G UMTS/HSDPA class A multi-slot
• 3G Bands 800/850/900/1700/1900/2100 MHz
• LED status indicators for GPS lock, GSM registration and OBD II communication
• Over-the-air  firmware  upgrade Supports TCP, FTP, HTTP and UDP
• Optional integrated GPS engine and antenna for tracking applications
• Supports SMS connectivity
• No external antennas or power connectors needed
• Supports OBDll protocols

External power supply might be 6-18V, which makes possible to use Xirgo XT2060 with all car models.

With an integrated J1962 connector, an extremely compact design powered through the OBDII port, and low power consumption, Xirgo XT2060 3G can be installed in matter of seconds which substantially reduces the high cost of installation.

With its highly mature firmware, Xirgo XT2060 3G supports TCP, UDP, FTP and is capable of firmware update and configuration over-the-air.

In case you are not able to configure device over the air, manual management over SMS-commands and configuration software is also available.

Xirgo XT2160 3G is a fully integrated tracking device for communicating mobile asset location information to owners via ubiquitous 3G networks. With an integrated GPS engine, embedded cellular, PCS and GPS antennas, Xirgo XT2160 3G is a cost effective solution for monitoring vital location data for remote assets

Xirgo XT2160 is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.

Xirgo XT2160 3G has an optional external GPS connector for instances where higher GPS sensitivity is required. With it’s compact design, Xirgo XT2160 3G can be covertly installed in tight locations.

Xirgo XT2160 3G provides two all-purpose digital inputs and one internal analog input used to monitor battery voltage. In addition to multiple inputs, Xirgo XT2160 3G provides a digital output that can drive ignition relays.

With Six-band GSM 3G module Xirgo XT2160 can be operated all over the world both in 2G and 3G networks.

Xirgo XT2160 has following features:

• 3G UMTS/HSDPA class A multi-slot
• 3G Bands 800/850/900/1700/1900/2100 MHz
• LED status indicators for GPS lock and network  registration
• Over-the-air  firmware  upgrade
• Supports TCP, UDP, and FTP
• Integrated GPS engine and antenna
• Supports SMS connectivity

External power supply might be 10-16V, which makes possible to use Xirgo XT2160 with all car models.

With its highly mature firmware, Xirgo XT2160 3G supports TCP, UDP, FTP and is capable of firmware update and configuration over-the-air.

In case you are not able to configure device over the air, manual management over SMS-commands and configuration software is also available.

Xirgo XT2460G is the most versatile and economical diagnostic & monitoring device available today for communicating vital vehicle information to owners via ubiquitous UMTS networks.

With an integrated GPS engine, cellular and GPS antennas, and integrated OBDII interface, the XT2460G is the ultimate solution for fleet managers in need of monitoring location, speed, and many other codes available on the OBD port of vehicles.

Xirgo XT2460G is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.

With a highly sensitive GPS engine along with an integrated GPS antenna and multiple OBDII protocols supported, Xirgo XT2460 3G can be installed in majority of vehicles that ware manufacture from 1996 and up.

With Six-band GSM 3G module Xirgo XT2460G can be operated all over the world both in 2G and 3G networks.

In addition to support for open OBD II standard parameters the XT2460G has additional functionality to support OEM proprietary parameters. This gives our customers unrivaled versatility for providing additional information from the vehicle BUS such as true odometer and seat belt status.

With an integrated J1962 connector, an extremely compact design powered through the OBD port, and low power consumption, the XT2460G can be installed in a matter of seconds which substantially reduces installation cost.

Xirgo XT2460G has following features:

• 3G Network (UMTS/HSPA)
• 3G Bands 850/1900 MHz
• LED status indicators for GPS lock, GSM registration and OBD II communication
• Over-the-air firmware upgrade
• Supports SMS, UDP, FTP
• Supports all J1962 OBD Pins
• 3-axis Accelerometer and Motion Detector
• Integrated GPS receiver and antenna for tracking applications
• Audible Feedback (Buzzer)
• Optional 250 mAh backup battery

External power supply might be 6-24V, which makes possible to use Xirgo XT2460G with all car models.

With its highly mature firmware, Xirgo XT2460 3G supports SMS, UDP, FTP and is capable of firmware update and configuration over-the-air.

In case you are not able to configure device over the air, manual management over SMS-commands and configuration software is also available.

Location and tracking

• GPS
• Continuous tracking mode

Mobile networks

• 4G LTE Cat M1
• 3G UMTS
• 3GPP release 13

Power supply

• Optional 250mAh Li-Ion battery
• 8 - 18 V DC external power supply

Other features

• LTE Cat M1
• LED status indicators for GPS lock, GSM registration, and OBD-II communication
• Over-the-air firmware upgrade
• Supports SMS, UDP, FTP, HTTP
• 3-axis accelerometer and motion detector
• Integrated GPS receiver and antenna
• Integrated dual-band cellular antenna
• OBD-II:J1850 PWM,J1850 VPW, ISO-9141-2, ISO-14230 KWP2000, ISO-15765 CAN
• Certifications: FCC, AT&T1,4, Verizon2, Sprint3

Xirgo XT4750C a self contained CDMA modem with integrated GPS engine and antenna, cellular and PCS antenna, optional motion detector, optional accelerometer and 6600 mAh internal rechargeable battery.

Xirgo XT4750C is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.

XT4750C has been designed with the latest GPS technology allowing GPS tracking under extreme conditions where most other competing products fail. The weatherproof case (meets IEC 68-2-27 environmental standard and is IP65 certified) allows Xirgo XT4750C to be used in a myriad of applications such as container, trailer and motorcycle tracking

With the support of CDMA, and dual band 800/1900, Xirgo 2150C is the ideal choice to use with CDMA networks

Xirgo XT4750C has following features:

•  LED status indicators for GPS, Network registration
•  Over-the-air configuration and firmware upgrade
•  Supports TCP, FTP and UDP
•  Integrated GPS receiver and antenna for tracking applications
•  Supports SMS connectivity
•  Internal 6600 mA rechargeable battery for applications requiring longer battery life

External power supply might be 6-24V, which makes possible to use Xirgo XT4750C with all car models.

Xirgo XT4750C also features a built-in rechargeable 6600 mAh battery. When fully charged it ensures about 3-4 days of device operation (in normal conditions).

With a powerful 32-bit micro- processor and unique power management algorithm, XT4750C consumes less than 120 μA in sleep mode and yet capable of periodic reporting of health, status and location of remote assets.

Xirgo XT4750C can be configured and managed over-the-air via GPRS channel. Also it supports Firmware-over-the-Air support.

In case you are not able to configure device over the air, manual management over SMS-commands and configuration software is also available.

Xirgo XT4760 3G series is a self-contained UMTS/HSPA modem with integrated GPS engine and antenna, cellular and PCS antenna, optional motion detector, optional accelerometer and 6600 mAh internal rechargeable battery.

Xirgo XT4760 is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.

XT4760 3G has been designed with the latest GPS technology allowing GPS tracking under extreme conditions where most other competing products fail. The weatherproof case (meets IEC 68-2-27 environmental standard and is IP65 certified) allows Xirgo XT4760 3G to be used in a myriad of applications such as container, trailer and motorcycle tracking

With Six-band GSM 3G module Xirgo XT4760 can be operated all over the world both in 2G and 3G networks.

Xirgo XT4760 has following features:

• 3G UMTS/HSDPA class A multi-slot
•  3G Bands 800/850/900/1700/1900/2100 MHz
•  LED status indicators for GPS, Network registration
•  Over-the-air configuration and firmware upgrade
•  Supports TCP, FTP and UDP
•  Integrated GPS receiver and antenna for tracking applications
•  Supports SMS connectivity
•  Internal 6600 mA rechargeable battery for applications requiring longer battery life

External power supply might be 6-24V, which makes possible to use Xirgo XT4760 with all car models.

Xirgo XT4760 also features a built-in rechargeable 6600 mAh battery. When fully charged it ensures about 3-4 days of device operation (in normal conditions).

With a powerful 32-bit micro- processor and unique power management algorithm, XT4760 3G consumes less than 120 μA in sleep mode and yet capable of periodic reporting of health, status and location of remote assets.

Xirgo XT4760 can be configured and managed over-the-air via GPRS channel. Also it supports Firmware-over-the-Air support.

In case you are not able to configure device over the air, manual management over SMS-commands and configuration software is also available.

Xirgo XT-4850C is an energy harvesting device supporting long term, remote deployments without the need to replace the self -charging battery. XT-4850C utilizes a highly efficient solar cell to continuously charge and maximize operating life of the internal Lithium Ion battery.

Customers who require frequent data for location, health and monitoring of their remote assets can be assured that the XT-4850C will provide more frequent data for longer periods compared to other asset tracking devices in the market today.

Xirgo XT4850C is embedded with GPS and doesn’t have support of GLONASS and alternative systems.

Designed to withstand various environmental factors, the XT-4850C is IP67 certified. With a fully sealed, protective case the device can be deployed in marine and desert environments.

Xirgo XT4850C can be operated in CDMA netowrks, and is certified by such GSM carriers as Verizon and Sprint.

Xirgo XT4850C has following features:

• 1xRTT CDMA
• CDMA Bands 800/1900 MHz
• Integrated GPS receiver for tracking applications
• Supports SMS , TCP, UDP, FTP, HTTP
• Over-the-air application firmware upgrade
• 8-pin circular bayonet connector with optional I/O’s
• Configurable, periodic reporting to extend battery charge
• 8 Mb Flash memory (upgrades available)
• Accelerometer and motion sensor
• Standard 10.6 Ah Lithium-Ion battery
• 1-Wire® Bus
• Zigbee®
• AGPS Support

Optional Zigbee® transceiver, optional 1- Wire® Bus, and multiple inputs allow for interfacing with various sensors to further enhance the XT-4850C to be utilized in unique applications.

External power supply might be 8-24V, which makes possible to use Xirgo XT4850C with all car models.

Xirgo XT4850C also features a built-in rechargeable 10600 mAh battery. When fully charged it ensures about 5-6 days of device operation (in normal conditions).

Xirgo XT4850C can be configured and managed via SMS channel.